Pipes and fittings for domestic sewerage

System gravity domestic sewage from polypropylene have a number of advantages compared to systems made of traditional materials - cast iron and with systems from other polymeric materials (polyvinyl chloride (PVC), polyethylene (HDPE)). Products of the plant "SINIKON" for many years is trusted by leading construction companies of our country. Talking about this long-term contracts with such leading developers as "DSK-1", GK "PEAK". Also, the systems of internal sewer SINIKON is equipped with objects such as the island of Russian, Central stadium in Sochi and other large objects. Under the order possibly production of non-flared tubes with 2 sockets and standard length. Modern buildings and structures is an extremely complex engineering systems with many different technologies and systems. One of the main life support systems of any buildings and structures acts as a drain. Extend the life and ensure smooth operation of sewer systems is possible with the use of pipes and fittings of modern ecologically safe materials such as polypropylene. Internal sewage system is required for the collection and withdrawal of overseas house solid and liquid waste human, domestic and rain wastewater. It includes: receivers, pipelines, risers and releases. The main component of domestic sewage are the tubes. Pipe for domestic sewage can be of different diameters: 32 to 110 mm. Pipe and fittings made of polypropylene SINIKON produced according to GOST 32414-2013. The use of products regulated by the SNiP 2.04.01-85, SP and SP 40-102-2000 40-107-2003. All products have valid certificates of conformity GOST R for serial production and permission to use conformity mark of voluntary certification of products. In 2016 the company "SINIKON" confirmed the high quality of its products, passing the certification of conformity of pipes and fittings of the "Standard" European standard EN 1451-1. The certification was conducted by experts one of the most authoritative in Europe accredited institutions for monitoring quality control of plastic products company SKZ. In-situ tests and the laboratory SKZ showed that the polypropylene system for domestic sewage and wastewater disposal plant "SINIKON" fully comply with the European standard DIN EN 1451-1:1999-03 together with DIN CEN/TS 1451-2:2012-05 and DIN 4102-1:1998-5 and DIN 4102-4:1994-03 and DIN EN ISO 11925-2:2011-02, together with DIN EN 13501-1:2010-01. The main advantages of polypropylene products The main advantages of pipes and fittings produced from polypropylene, must include: a longer operation life compared with products manufactured from steel and cast iron, the smaller the likelihood of blockages, pipe made of polypropylene is not prone to clogging, easy to install and have an aesthetic appearance. Polypropylene piping resistant to light ageing, so without negative consequences can be outdoors even when the air temperature is below zero. Held their inside the sewer perfectly withstands sudden changes in temperature. In addition, the Assembly and disassembly of such a system is simplified due to the presence of the sealing rings, and runs on the principle of design. The resulting connections are tight and the sewage system is resistant to aggressive wastewater. Polypropylene pipes have a high upper limit of permissible temperatures. For example, polypropylene pipes, can withstand temperatures of wastewater up to 95°C and extreme limit of PVC pipes and HDPE is only 65°C. Therefore, in residential and public knowledge, to avoid deformation of the piping at high temperatures, and in consequence of a leak in the expansion joints, it is recommended to use when installing internal sewage system of polypropylene pipes and fittings. It is extremely important when selecting pipes to take into account the environmental safety of the material from which they are made. This is polypropylene. If you compare the polypropylene with polyvinyl chloride (PVC), the latter in the combustion process can release into the air substances such as phosgene, hydrogen chloride and others. In addition, the use of pipes and fittings PP reduce the cost of transportation and installation of at least 25%, in comparison with alternative systems. Pipes and fittings of PP produced by the company "SINIKON", for its technological characteristics are not inferior to products of world producers. However, their cost is much lower.